The KX15DT features Dual element pyro-electric sensor with X-band DRO based microwave both of which need to be triggered to set off the Alarm, this reduces the risk of false alarms.

Triple LED indication

Microwave – orange, PIR – green, alarm – blue

Active self test 

If there is no activation after a 5 hour period it will actually self test both the PIR and microwave.

Selectable EOL resistors

The detector incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.

Auto Sensitivity Feature

Depending on the environment condition, the detector will automatically adjust the sensitivity.

Microwave Frequencies Bands 

3 different frequency bands to avoid interference between detectors are installed in the same room.

Blue Wave Technology (BWT)

This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of some key components:

The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges.
Digital temperature compensation digitally adjusts the detectors sensitivity to ensure performance is maintained
Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.